How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

i had powersurge when when returned washer would not power

This answer was rated:

i had powersurge when when returned washer would not power up power button only beeps
may i have the model number and does it show control locked
Customer: replied 6 years ago.
where is number does show control lock
hold down the end of cycle button for 10 seconds and tell me what happens please
Appliance Tech Larry and other Appliance Specialists are ready to help you
Customer: replied 6 years ago.
answerdid not work
open the door and get me the model number from the sticker just inside please
Customer: replied 6 years ago.
wfw9200sq02
sorry to be so long but had to stop and take my insulin ,, is the control panel blank and does it do anything?
Customer: replied 6 years ago.
no not on not doing anything
how old is the washer?
the power surge knocked out the control and the part number is XXXXX and cost about $175 and you can get it at a local appliance parts dealer near you / thanks
Appliance Tech Larry and other Appliance Specialists are ready to help you