How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a dish drawer model DD603. It is flashing the code

Resolved Question:

I have a dish drawer model DD603. It is flashing the code F1. The user manual says turn off the power and water and call a repair man. Can I solve this myself or reset the Machine
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
F-1 is a flood condition code, you need to dry the dish washer out completely .remove the bottom drawer and dry the sensor in the back of the machine, sop up all water inside then take a hair dryer and dry the rest inside, there is a sensor in the back that you need to point the hair dryer at , once this is done it should run fine, if not you will need to call a tech, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions