How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask applianceguy Your Own Question
applianceguy
applianceguy, Customer Service
Category: Appliance
Satisfied Customers: 1902
Experience:  Ten Years experience. Certified in most major brands Including Whirlpool Frigidaire maytag Amana.
9557001
Type Your Appliance Question Here...
applianceguy is online now
A new question is answered every 9 seconds
Appliance

How do you remove the timer knob on a Whirlpool washer

?
Submitted: 6 years ago.
Category: Appliance
Ask Your Own Appliance Question
replied 6 years ago.
Hi, Unplug washer. push the timer knob in. Use a putty knife under the corners of control panel and main top to release clips. Flip control panel up.There is a hole on the back of the timer with a tab in it. pull the tab out to release the timer knob. Now pull the timer off the shaft.
Customer reply replied 6 years ago.
is the tab supposed to seperate from the shaft?
it all seems to move together.

not releasing

applianceguy, Customer Service replied 6 years ago.

With the timer knob pushed in it should not move when you pull on the tab. If the knob is not pushed in they will move together.

Customer reply replied 6 years ago.
Got it.

It was as if it was dry rotted.
applianceguy, Customer Service replied 6 years ago.
Great. Have a nice evening.