How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a FEQBB30DS0 Figidaire Dryer. The drum turns and there

Resolved Question:

I have a FEQBB30DS0 Figidaire Dryer. The drum turns and there is no heat. Disconnected the dryer and performed the function test for heat and the coil heats up. Run the dryer normally and the drum turns with no heat. Checked exaust and lint traps, no blockages. No error codes on display.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

how did you preform the function test? what did you do?

Customer: replied 6 years ago.
We unplugged the dryer and performed the function test as outlined in the service tech documents that came with the dryer. We held down keys similtaneously and moved through the test as described on the document.
Expert:  Bryan replied 6 years ago.
how would the heater heat up with the dryer unplugged? if the heater came on assuming you did this with the dryer plugged back in it probably the control board, when you do the test it bypasses the control and just tests the heater,it still needs to go through the thermostats so they should be good,
Customer: replied 6 years ago.
you are correct. we unplugged it, plugged it back in and ran all the tests.
Expert:  Bryan replied 6 years ago.
ok so no codes came up in test mode correct?
Customer: replied 6 years ago.
no fault codes displayed, only the codes representing the test being conducted (i,e, H for heat test, AF for aut fluff, etc.)

Related Appliance Questions