How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Have a GE gas dryer model #dcvh660gh0bb,Have power to front

This answer was rated:

Have a GE gas dryer model #dcvh660gh0bb,Have power to front panel and when start is pressed all you hear is a click from the black relay on the magellian power pcb

is the belt intact? not broken?

Customer: replied 6 years ago.
WOW thank you very much !!!Didn`t hear motor hum so i asumed all was fine but took the step to take further apart and seen belt lieing in the bottom torn. (figured it was driven by a drive wheel) not seeing a belt on drum from top.
thats the issue, there is a switch that is on the pulley , when the belt breaks it wont run, replace it and you will be all set, thanks Bryan
Bryan and other Appliance Specialists are ready to help you