How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73368
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a Bosch Nexxt 500 Series dryer and it is not heat drying

Resolved Question:

I have a Bosch Nexxt 500 Series dryer and it is not heat drying as of this morning. What could be the problem?
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
This could be a bad element, or your high limit thermostat may just be tripped. If you pull they dryer out and remove the back panel (yes there are a lot of screws holding it on), you'll see a black circular device with a tiny red button attached to the side of the heater. Push the red button hard until it's clicks. If it clicks, then it reset and you'll be good to go. If not, then you need to replace your element. Below is a link to the thermostat so you can see what it looks like.


Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions