How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Justin Your Own Question
Justin, Appliance Technician
Category: Appliance
Satisfied Customers: 829
Experience:  Owner of Shaffer's Appliance Service
Type Your Appliance Question Here...
Justin is online now
A new question is answered every 9 seconds

how do I get the front panel off of a ge 2070b9ww I think

Customer Question

how do I get the front panel off of a ge 2070b9ww? I think I need to check the pump for a clog. washer goes thru agitation sequence, does not drain, spin, or rinse. timer goes around and it starts the agitation cycle again.
Wife says she washed a pillow that fell apart in washer.
Submitted: 6 years ago.
Category: Appliance
Expert:  Justin replied 6 years ago.

Hello and thank you for the opportunity to help you.


You place a metal putty knife/paint scraper between the front panel and the top. If you get a flash light, you can view in this area to see some clips. Once your putty knife is lined up with the clips, you push the putty knife in hard and pull out on that corner. Repeat on other corner. Sometimes, the clips can be difficult.

Related Appliance Questions