How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Maytag Quietseries 200 dishwasher. When I press the

Resolved Question:

I have a Maytag Quietseries 200 dishwasher. When I press the start button, nothing happens. I know the unit is getting power because pressing the buttons for various cycle settings results in those lights going on and off. It just won't start.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.

 

can you get me the full model # Appliance Model Illustration

Customer: replied 6 years ago.
Couple of different numbers on the door.
MDB4651AWB
32584785JE
E39927
LR111720
Expert:  Bryan replied 6 years ago.
you may have a door switch issue in this, Part(NNN) NNN-NNNN width=there are 2 switches in the door latch assembly, check them both, let me know, thanks, Bryan
Customer: replied 6 years ago.
Checking the door latch assembly requires taking off the interior cover of the door, yes? Or is there any easier way to check the assembly?
Expert:  Bryan replied 6 years ago.
yes you need to remove the inner door panel,
Customer: replied 6 years ago.
I've had to leave for work and won't get to this again until this evening. Thanks for your help so far. Will respond again after 5:30pm EDT.
Expert:  Bryan replied 6 years ago.
ok, have a great day
Customer: replied 6 years ago.
I now have access to the door latch assembly. Nothing appears to be obviously wrong with the door switches; no loose connections obvious etc. Is there anything in particular I should be looking for?
Expert:  Bryan replied 6 years ago.
do you have a volt meter?
Customer: replied 6 years ago.
No, I don't.
Expert:  Bryan replied 6 years ago.
ok , well you really need to check the continuity through the door switches, this is done with a volt meter.if this switches test good then its the control board , do you know someone with a meter?
Customer: replied 6 years ago.
No. Are we at a point where I need to call a repairman over?
Expert:  Bryan replied 6 years ago.
I'd say can a tech over to look at this , without the proper tools you cant test it, sorry , thanks Bryan
Bryan and other Appliance Specialists are ready to help you