How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Frigidaire model # LGGF305MKFE, set oven to 350 2hrs later

This answer was rated:

Frigidaire model # XXXXX set oven to 350 2hrs later 211. what up.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.

 

does the broiler work?

Customer: replied 6 years ago.
let me try, the bottom drawer does work, stand by 1 while I check the broiler. thank you for your response. D.
no problem
Customer: replied 6 years ago.
no on the broiler. light glow no gas light. it should light right away, yes.
yes, you say this is only 2 weeks old?
Customer: replied 6 years ago.
yes, virgin
has it ever lit since you had this? I'm trying to get a handle on whats going on with it, who installed this?
Customer: replied 6 years ago.
I did the install, cook top work's bottom drawer work's oven only get to 211 when set to 350, no on the broiler.
sounds to me like the regulator is not open, there is a spring type switch on this, you can see it on the side in this picture, Part(NNN) NNN-NNNN width=make sure its in the down position, like in the picture and not up.
Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 6 years ago.
ok, i'll check this out later, thank you for your help.
Customer: replied 6 years ago.
I did the install
ok, did you check the regulator?
Customer: replied 6 years ago.
Turns out that the service tech said switch needs to be up. Now works, thanks anyway.
your welcome thanks Bryan