How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a amana 27 front load washer NFW7200TW and the door

Resolved Question:

I have a amana 27" front load washer NFW7200TW and the door wont close and lock it seems the sensor is in lock mode with the door open . how can i fix it
thanks Harold
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.


remove the bottom panel under the door and reach up inside where the door lock, there is a little ring you need to pull down to get the lock out of the lock position, Part(NNN) NNN-NNNN width=you can see the ring on the right side of this picture, it is facing down in the machine if it doesn't unlock then replace the switch, heres a link, its made by maytag, thanks Bryan

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions