How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73388
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have subzero refrig. Model 650 and it top and bottom The

Resolved Question:

I have subzero refrig. Model 650 and it top and bottom The bottom freezer when trying to pull out it is very difficult to do so..The suction is horrible.. The rubber trim around is ripped two small places but do not think that would do it..Please answer to [email protected]
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
you'll just need to replace the door seal itself in order to correct the issue. If you do not like the suction on the door, you'll want to put a couple pin holes around the door seal all the way from the outside to the inside. This will allow the unit to breath better and not create the suction if this is not something you like.
Tyler Z. and 3 other Appliance Specialists are ready to help you

Related Appliance Questions