How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 75308
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Hi I have a G.E. dishwasher model gsd2200l03 SERIAL

Customer Question

Hi I have a G.E. dishwasher model

gsd2200l03 SERIAL HD 740465 and I'm getting a low water level code but it's full of water. What parts do I need and do you have a repair manual ?
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
This is either a bad control board, or a faulty water level switch. Open the door and locate the little plastic float device in the bottom of your tub near the front. Lift it up and down and make sure it still clicks. If so, then you need to order and replace your control board, otherwise, look into the float device to figure out what is going on with it. And there is no repair manual for this unit from GE unfortuantely.
Tyler Z. and 3 other Appliance Specialists are ready to help you