How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a kenmore gas dryer. How do you remove the front panel

Resolved Question:

I have a kenmore gas dryer. How do you remove the front panel? There is no small access panel.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
remove the lint filter and the two screws under it, then pop the top up with a flat head screw driver, once you have the top up remove the 5/16 screws down the outer edge inside # XXXXX in this diagram, then remove the door switch wires and lift the front panel off the bottom clips. thats it, hope this helps, thanks Bryan
Bryan and 3 other Appliance Specialists are ready to help you

Related Appliance Questions