How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

HI, HAVE A GE ADVANTIUM 120 MICROWAVE. EVERYTHING WORKS FINE

Customer Question

HI, HAVE A GE ADVANTIUM 120 MICROWAVE. EVERYTHING WORKS FINE ON IT, BUT THE DISPLAY LIGHTS ARE FADING OUT . ACTUALLY RIGHT NOW INSTEAD OF THE TIME, THERE IS BARELY ANYTHING ON THE DISPLAY AT ALL. IS THIS A SIMPLE FUSE
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
unfortunately its not a fuse, sorry, its the pcb board itself, Part 911222this will need to be replaced, you can order this @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-SCA1000+OR+1001-%3d%3db3d618389ei911222&PartID=911222 thanks Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 6 years ago.
wow, this would be the second time already replacing that. its simple to do yourself isnt it?
Expert:  Bryan replied 6 years ago.
not to bad, just open the control panel and there are screws holding it in, you have had this replaced before?
Customer: replied 6 years ago.
yeah probably 3 maybe 4 years ago, microwave is about 5 years old i guess. thanks and god bless. ive had this apart before and its pretty baSIC
Expert:  Bryan replied 6 years ago.
ok well wishes and thanks, Bryan