How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Is there a rest button on a maytag neptune. We had a power

Resolved Question:

Is there a rest button on a maytag neptune. We had a power outage. When the power came back on - there is power to the appliance, but the on off button does not work
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
can you get us the full model #? First, here are some tips to help with your model number:
  1. Don't enter a dash if it's not required.
  2. Don't enter any blank spaces.
  3. Be sure a zero is not the letter O.
  4. Be sure a lower case L is not a 1.
  5. Kenmore models always have a 3 digit prefix such as 110 or 665, then a period, then more numbers.
Next, look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or stamped onto the tag and it may be written in two different type sizes or styles.

You might find the tag in one of these places:

Top-loading washer only

  • Under the lid
  • On the back of the control panel
  • On the lower-front or side of the main cabinet body

Front-loading washer only

  • Behind the door
  • Behind or on top of the control panel
  • On the side of the unit near the front

Top- or front-loading washer-dryer combination unit

  • Inside the dryer door, on the door frame
  • On the top of the dryer
  • On the side of the washer, near the bottom, front
  • Under the washer lid
Customer: replied 6 years ago.
Expert:  Bryan replied 6 years ago.
does the control light up at all?
Customer: replied 6 years ago.
Expert:  Bryan replied 6 years ago.
this means the main control board is bad. Part(NNN) NNN-NNNN width=
Bryan and 4 other Appliance Specialists are ready to help you

Related Appliance Questions