How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Our dishwasher repeatedly has left half the powder soap in

This answer was rated:

Our dishwasher repeatedly has left half the powder soap in the dispensing unit and the dishes are coated with a powdery coating. What to do?
can you get us the make and model # ?
Customer: replied 6 years ago.
D-3122
ok how much water is in the bottom after this fills? this is an Asko correct?
Customer: replied 6 years ago.
No water in the bottom. Dry. It is an Asko. (Second one purchased/great capacity/poor repair experience)
ok there could be a couple of different reasons for this 1 the water inlet valve is bad. Part(NNN) NNN-NNNN width=or 2 the float is stuck, Part(NNN) NNN-NNNN width=this is in the bottom pan underneath the machine, you will need to uninstall the machine to get to the float assembly. if you have a volt meter you can check the power to the valve if its getting power(120 volts) then the valve is bad, if not check the float and see if its stuck in the up position, hope this info helps, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you