How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Ice cube dipenser flap will not open and allow cubes to fall

Resolved Question:

Ice cube dipenser flap will not open and allow cubes to fall into glass.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
can you get me the model #?
Customer: replied 6 years ago.

PS123SGNA BS

 

Serial # 415260

Expert:  Bryan replied 6 years ago.
you will need to replace the solenoid in this, Part(NNN) NNN-NNNN width=these rust and get stuck and wont open the flap. its part # XXXXX on this diagram, part # XXXXX pops off and then you will see the screws to take the rest apart, you can get this @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-PSS23LGSABB-%3d%3dei1194707&PartID=1194707 thanks Bryan
Bryan and other Appliance Specialists are ready to help you