How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Jenn air gas range electronic touch control 800 Had to

Resolved Question:

Jenn air gas range
electronic touch control 800

Had to move oven to tile under it. Electric and gas disconected and reconected.
The control screen reads 3.0 none of the controls work except cancel. When I push cancle the clock comes on, but cannot be changed. Still no controls work except cancel but nothing happens when I push it. I tried pushing the clock pad for 5 seconds, nothing.
unpluged and let stand for awhile and it came back to 3.0. The oven doubble chirps every 5 minits. Left oven unpluged over nite, no change. The oven lite does come on when door is opened.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get us the full model #/?
Customer: replied 7 years ago.
Expert:  Bryan replied 7 years ago.
unfortunately for some reason the clock assembly has gone on this,
Appliance Part Mouse OverAppliance Part Mouse Over
Mouse over to see other views. Everything you see is included in this part.
Part(NNN) NNN-NNNN width=
this will need to be replaced , you can order this @ thanks Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
Is there anything I should or know special to take the clock out. I am not a mechanic but can figure out simple stuff in plain sight
Expert:  Bryan replied 7 years ago.
nothing special about replacing this accept do the wires one at a time heres a diagram of the control panel, just remove the panel # XXXXX and the clock will be right there, , Bryan