How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73413
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

i have a kenmore elite trio botom freezer refrigerator and

Resolved Question:

i have a kenmore elite trio botom freezer refrigerator and need to get scratches out of the doors. What is the best method and are the doors painted or real stainless steel?
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
these doors are real stainless steel, and they make kits to sand down your stainless steel and re-oxydize the panel but the problem is they don't work well on doors at all. It's very difficult to even the scratches on the surface of stainless when doing it by hand, so these kits work very well on things like small handles and such, but they do NOT work well at all on doors and aren't recommended. The only thing you can doo on a door if it gets scratched is literally replace the door.
Customer: replied 6 years ago.
where do you go to buy replacement doors and do you know how much they cost?
Expert:  Tyler Z. replied 6 years ago.
yes, you can order them at with a full model number and depending on the panel you need they run between $200-400.
Tyler Z. and 2 other Appliance Specialists are ready to help you

Related Appliance Questions