How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kenmore range model 790.9611 and when I turned my

Resolved Question:

I have a Kenmore range model(NNN) NNN-NNNNand when I turned my oven on today I got beeps and an F10 display. Help what does that mean. Nik Hanlon XXX-XXX-XXXX
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.

(F10 only) Check *RTD Sensor Probe & replace if necessary. If oven is overheating, disconnect power. If oven continues to overheat when the power is reapplied, replace EOC. Severe overheating may require the entire oven to be replaced should damage be extensive.


most likely its your temperature sensor in this, Part(NNN) NNN-NNNN width=this is on the back wall inside the oven, you can order this @ for around $22.00, thanks Bryan

Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions