How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

GE washing machine GCXR2080 filed with water, washed the load

This answer was rated:

GE washing machine GCXR2080 filed with water, washed the load but WILL NOT pump out the water nor spin .... water will pump in but not pump out nor spin the clothes to rinse.

I have emptied the clothes and water out as much as I can ....

Suggestions please to fix ....
can you recheck the model #? its not comming up,
First, here are some tips to help with your model number:
  1. Don't enter a dash if it's not required.
  2. Don't enter any blank spaces.
  3. Be sure a zero is not the letter O.
  4. Be sure a lower case L is not a 1.
  5. Kenmore models always have a 3 digit prefix such as 110 or 665, then a period, then more numbers.
Next, look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or stamped onto the tag and it may be written in two different type sizes or styles.

You might find the tag in one of these places:

Top-loading washer only

  • Under the lid
  • On the back of the control panel
  • On the lower-front or side of the main cabinet body

Front-loading washer only

  • Behind the door
  • Behind or on top of the control panel
  • On the side of the unit near the front

Top- or front-loading washer-dryer combination unit

  • Inside the dryer door, on the door frame
  • On the top of the dryer
  • On the side of the washer, near the bottom, front
  • Under the washer lid
Customer: replied 6 years ago.
Does this # XXXXX more sense .... it was on a piece of paper inside the face of the switch panel that my husband has removed ...
no that # XXXXX't work either , is this a front load or a top load?
Customer: replied 6 years ago.
Top Load - I have the owners manual and that was where I got the model #

Another # XXXXX the page is .... 123C8296P001
ok your drain pump is clogged or bad, you will need to remove the front panel and take the hoses off the pump and check for obstructions, there are two clips along the front panel between the panel and the top, you need to use a putty knife and push these clips up, first bail the water out of machine, when you get the front off the pump will be on the right side take the hoses off and clean the pump and hoses, this is common on these machines, if there no clog then the pump is bad, replace it, thanks Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions