How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Dave Your Own Question
Appliance Tech Dave
Appliance Tech Dave, Home Appliance Technician
Category: Appliance
Satisfied Customers: 2355
Experience:  30 years experience specializing in Whirlpool, KitchenAid and Kenmore
Type Your Appliance Question Here...
Appliance Tech Dave is online now
A new question is answered every 9 seconds

My Maytag 4000 washer keeps saying F20 before finishing each

Resolved Question:

My Maytag 4000 washer keeps saying F20 before finishing each cycle. Why is this doing this and how can I get it to turn off?

Submitted: 6 years ago.
Category: Appliance
Expert:  Appliance Tech Dave replied 6 years ago.
Hello and thanks for your question. I think your washer is an Epic Z but I will still need the model number. It should be just inside the door opening. Dave
Customer: replied 6 years ago.
Model MHWE450WW00
Expert:  Appliance Tech Dave replied 6 years ago.
Thanks. On your washer the F20 cost means there was a problem with either no water or slow water fill to the washer. If it takes more than 13 minutes to fill the washer, the water valves are shut off and the error is displayed. If you are on a well and the screen on the cold water valve is partially blocked this will happen. Check this and let me know if you still need help. Dave
Appliance Tech Dave and other Appliance Specialists are ready to help you

Related Appliance Questions