How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a GE Profile gas stovetop.It just started clicking,(like

Resolved Question:

I have a GE Profile gas stovetop.It just started clicking,(like the starter, only much slower.)
The clicking won't stop, even though all 4 burners are off. What should I do?
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
can you get us the model #? thanks Bryan
Customer: replied 6 years ago.
is G093-3 a model #
Expert:  Bryan replied 6 years ago.
LOCATE YOUR RANGE/STOVE/OVEN MODEL NUMBER
First, here are some tips to help with your model number:
  1. Don't enter a dash if it's not required.
  2. Don't enter any blank spaces.
  3. Be sure a zero is not the letter O.
  4. Be sure a lower case L is not a 1.
  5. Kenmore models always have a 3 digit prefix such as 110 or 665, then a period, then more numbers.
Next, look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or stamped onto the tag and it may be written in two different type sizes or styles.

You might find the tag in one of these places:

Cooktop/Range/Stove

Gas:

  • Inside the cooktop--if the top lifts up
  • On the outside, bottom of the unit
  • Inside the top of the vent duct--if it's a "downdraft" unit

Electric:

  • Under one of the surface burners, or inside the cooktop--if the top lifts up
  • On the outside, bottom of the unit
  • Inside the top of the vent duct--if it's a "downdraft" unit
Customer: replied 6 years ago.
I think that I need a live repairman....i don't know how to remove the cooktop
Expert:  Bryan replied 6 years ago.
ok sorry there are a lot of different places they put them , the problem is either the spark module or one of the burner switches either way would require taking this apart , but maybe knowing what the causes may be will help when a service man comes, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions