How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

Schematic/parts list for a SEARS 1 1/2 ton hydraulic floor

Customer Question

Schematic/parts list for a SEARS 1 1/2 ton hydraulic floor jack Model #NNN-NN-NNNN lifing range 5"-14 1/2" code date unreadable
Submitted: 6 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 6 years ago.

Hi...Click on the link below..The only list available...

 

 

CLICK HERE

Customer: replied 6 years ago.
Master thank you for the parts schematic. I thought that if I saw the parts I might figure out how it works. After seeing the parts and reading the instruction plate on the jack , I still cant figure it out. I unscrewed the plug and saw fluid. How can I raise & lower the jack ?
Expert:  Bob L Your Appl Pal replied 6 years ago.

Put the plug back in..Turn it clockwise until it stops(do not over tighten.)...Once you have the screw turned in ...Pump the jack with the handle...It should go up...To lower it...Turn the screw counter clockwise...The jack should begin to come down...Bob

Related Appliance Questions