How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9052
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

when FL appears on a whirpool washer how do i get it off

Customer Question

when "FL" appears on a whirpool washer how do i get it off
Submitted: 6 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 6 years ago.

it is actually a LF code

Overfill Condition

This error message occurs only if the machine control board

sees an open circuit at P17. If this is the case:

¦ Press Stop/Cancel to clear the display.

¦ With the power disconnected, check the upper harness

connection to P17 on the machine control. Look for any

contaminants on the contacts. There should be a closed

circuit in the harness between P17 contacts 1 and 3.

¦ Replace the upper harness or machine control as necessary

Customer: replied 6 years ago.
where and what is p17
Expert:  Whrlp Master Tech replied 6 years ago.
The P-17 is a connector on the Machine control board under the console.

Related Appliance Questions