How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73368
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

What does Fault Code F13 on Frigidaire PLES399ECG mean, and

Resolved Question:

What does Fault Code F13 on Frigidaire PLES399ECG mean, and how do I fix it?
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
F13 = Bad EEPROM Identification/Checksum error.

Turn the power off at the circuit breaker or unplug the oven for 60 seconds. If the error code returns when you turn the power back onto the unit, then you have a bad display control board and you will need to replace it.
Customer: replied 6 years ago.

Found those remedies online already. Have turned off breaker twice, and Electrolux sent two replacement display control boards. I have tried both of them, and still get F 13 fault code.

Expert:  Tyler Z. replied 6 years ago.
then you have a bad communication between your main relay board and the display board. Check the wiring between each board and if it checks good replace the main relay board.
Customer: replied 6 years ago.
Is that something that should be done by a trained professional, or can I do it easily myself?
Expert:  Tyler Z. replied 6 years ago.
probably best left to a trained professional when the issue is not the obvious one only because tracking down a loose or bad wire can be tricky and deceptive. So before spending a lot of money on another board I would have someone look at the wiring.
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions