How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I TRIED TO JUST SPIN FOR 9 MIN.IT JUST WONT GO INTO THE NEXT

Resolved Question:

I TRIED TO JUST SPIN FOR 9 MIN.IT JUST WON'T GO INTO THE NEXT CYCLE IT STAY'S IN THIS SAME CYCLE
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you get me the make and model#?
Customer: replied 7 years ago.
NEPTUNE MAH8700AWW
Expert:  Bryan replied 7 years ago.
unfortunately you need the control board in this, Part(NNN) NNN-NNNN width=this is common on these machines, this is an expensive part, $226.70 @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-MAH8700AWW+-%3d%3dei1185471&PartID=1185471 just click the blue link, hope this helps, thanks Bryan
Customer: replied 7 years ago.
O.K. THANK'S MY NEXT MACH. WON'T BE A MAYTAG TOO MANY PROBLEM'S NOT WHAT THEY USE TO BE BIG DISAPPONTMENT
Expert:  Bryan replied 7 years ago.
these are the worse machines on the market, your better of with a top load direct drive whirlpool, these run forever, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions