How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Whirlpool microwave (built in with hood) and the door

Resolved Question:

I have a Whirlpool microwave (built in with hood) and the door handle is broken. I ordered a new handle but I do not know how to get inside the door to change the handle. There are three screws on the left side of the door but not other visible screws.

How do i get in there?
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
this has an inner door liner, you need to pry this off to get at the door handle assembly, this is snapped on. use a small screw driver to pry this off, heres the door breakdown, part#2 is what you need to remove to get to the screws, hope this helps, thanks, Bryan
Bryan and 4 other Appliance Specialists are ready to help you