How do you remove the control panel to a Jenn Air wall oven? A service technician came by and he didn't know how to do it. Everything works except the bake button is nonresponsive even after resetting the circuit breaker.
Make: Jenn Air
Unplugged the wire prongs, but can't plub in one of the prongs that is tucked away behind the control panel. I can't find any screws that secure the control panel.
Can i have teh model# XXXXX
There is a vent under the control panel have you removed it?
My recollection is the oven door closes pretty flush to the control panel. The vent is above the control panel and beneath the attached microwave oven.
There is one where the oven door closes.That needs to be removed it is part #3 in the breakdown click on this link.
I removed the vent. No screws above, beneath or around the control panel. It looks like the entire oven unit needs to be pulled out to access the control panel. Is that true?
The issue is one last remaining wire prong is impossible to plug back in because there isn't enough room to fit my hand all the way up behind the control panel and then plug it in. The service tech couldn't do it either. Is there a better way?
Then it sounds like you will have to pull the unit out and remove the top cover.
20 years experience