How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74301
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds
Appliance

how do you reset controls locked on whirlpool duet washer

\
Submitted: 6 years ago.
Category: Appliance
replied 6 years ago.
press and hold the "end of cycle signal" button for 5 seconds. If it doesn't reset then you have a bad front interface control board.
Customer reply replied 6 years ago.

There is no end of cycle button

 

Tyler Z., Appliance Doc replied 6 years ago.
there is actually. I just looked at it in your manual to verify.
Customer reply replied 6 years ago.

so where is it located we have control on, start and cancel

 

Tyler Z., Appliance Doc replied 6 years ago.
it's a small button.... near the middle under the center knob maybe off to the right.
Customer reply replied 6 years ago.

Thanks it is the end of cycle button, you were worth every penny

 

Tyler Z., Appliance Doc replied 6 years ago.
ok have a great rest of the day.
Tyler Z., Appliance Doc replied 6 years ago.
I see this is still open, is there anything else I can help you with?

Related Appliance Questions