How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

fault f 1 coming up on display of drawer dishwasher told might

Resolved Question:

fault f 1 coming up on display of drawer dishwasher told might be filter problem
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
F-1 means flood condition, F1 means that the unit is detecting water underneath the bottom drawer. pull the bottom drawer out and put in on the plastic tabs on the side near the bottom just behind the front panel, pull the drawer out far enough to slide a towel behind the drawer,you need to soak up all the water you can , then you may need to use a hair dryer to dry the sensor in the left back corner, when the sensor detects that theres no more moister in the pan the F-1 will go away, sometimes the cause for thgis is stacking the dishes to high and the lid doesnt shut down tight and seal the drawer. thanks Bryan
Customer: replied 7 years ago.
how do i get the bottom tray off
Expert:  Bryan replied 7 years ago.
If you pull the bottom drawer out and put in on the plastic tabs on the side near the bottom just behind the front panel, you can pull the drawer out far enough to slide a towel behind the drawer. Use a towel to soak up all the water you can.
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions