How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9595
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

f02 and sud code on kenmore he4t washer. i have cleaned all

Resolved Question:

f02 and sud code on kenmore he4t washer. i have cleaned all drains and hoses. washed with no detergent in machine. this happens throughout cycle
Submitted: 7 years ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 7 years ago.

dwhen do you get the code ?

At the first ,middle or end of the cycle.

Customer: replied 7 years ago.
happens many times during cycle. seems mostly middle to end
Expert:  Whrlp Master Tech replied 7 years ago.
and is there any visable soap suds at all in the bottom of the sump?

Edited by Whrlp Master Tech on 1/2/2010 at 1:39 AM EST
Customer: replied 7 years ago.
no suds. drain was clogged when codes first happened. sud comes up on display they few seconds later f 02 comes up. i press pause than start. machine starts. about a minute or 2 after restart sud comes up than f 02. and keeps repeating. cycle never finishes.
Expert:  Whrlp Master Tech replied 7 years ago.
and if you select a drain cycle does it drain properly?
Customer: replied 7 years ago.
yes
Expert:  Whrlp Master Tech replied 7 years ago.

Ok may I have the model number of the aplliance ?

will be just inside after you open the door.

Customer: replied 7 years ago.
110.45986401 serial css4504876 machine seems 2 not be draining right. water still inside. running srain and spin cycle right now
Expert:  Whrlp Master Tech replied 7 years ago.
and you have removed the bottom front panel and cleaned the button catch /filter on the pump assembly you said correct?
Customer: replied 7 years ago.
yes. just ran drain and spin cycle worked perfect. i have the front off now and button catch open now.
Expert:  Whrlp Master Tech replied 7 years ago.
ans the button catch is clear of debris?
Customer: replied 7 years ago.
yes.
Expert:  Whrlp Master Tech replied 7 years ago.

ok ,thank you for helping me with all my questions .

I would have to assume that you have a defective pressure switch .

 

This is a link with part number,price, and where to order on-line.

It is item #23 on the unit it is located in the right rear corner ,after you remove the top panel .

http://www.sea rspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=11045986401&productCategoryId=0153200&brandId=0583&brandDescription=KENMORE%20ELITE&modelName=RESIDENTIAL-WASHER&diagramPageId=00001&componentDescription=TOP%20AND%20CABINET%20PARTS&documentId=K0510007&blt=06

And Have a Happy New Year.

Whrlp Master Tech and other Appliance Specialists are ready to help you