Appliance

Ask an Appliance Question, Get an Answer ASAP!

maytag washer shuts off on code f h.hoses and screens are

Answered by:Appliance Man
Home Appliance Technician
Positive Feedback: 91.5 %
Accepted Answers: 9868

in Appliance

Recent Feedback

Positive

Great service. Gave me the exact information I was looking for.

Customer Question

maytag washer shuts off on code f h.hoses and screens are clear.

Optional Information:
Make: maytag
Model: mfw9600sqo

Already Tried:
checked water supply.checked solinoid for continuity. looked for loose wires.

Submitted: 1244 days and 20 hours ago.

Category: Appliance

Value: $14

Status: CLOSED

Expert: Appliance Man replied1244 days and 20 hours ago.

Do you have the factory washer hose connected to this or some stainless steel ones?

Customer replied1244 days and 20 hours ago.

factory hoses. hoses have water coming thru.

Expert: Appliance Man replied1244 days and 20 hours ago.

No water detected entering machine or Pressure switch trip not detected.

If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed.
Or
If the control has turned the water valves on and after 8 minutes the flow meter has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash.

Press PAUSE/CANCEL twice to clear the display.

Potential Causes

If there is no water in the unit:

- Make sure that both valves at the water source(s) are turned on all the way.
- Check for plugged or kinked inlet hoses or plugged screens in the inlet valves
- Verify inlet valve operation
If there is water in the unit:
- Verify Drain pump operation
- Pressure Switch Hose is in good condition and properly connected to Tub and Pressure switch

Verify there is not a siphon problem
Verify wire harness connections to; Inlet Valves, Pressure Switch, Drain Pump, Flow Meter, and Central Control Unit (CCU)
Check all hoses for possible leaks
Verify pressure switch operation
Verify flow meter operation

• Verify CCU operation

Customer replied1244 days and 19 hours ago.

i am not happy with the answer.please refund my money.

Expert: Appliance Man replied1244 days and 19 hours ago.

Make sure the drain hose is only in the drain pipe 6-8 inches.

Customer replied1244 days and 19 hours ago.

please refund mymoney

Expert: Appliance Man replied1244 days and 19 hours ago.

You havent paid anything yet because you havent accepted an answer.

Customer replied1244 days and 19 hours ago.

please cancel

Expert: Appliance Man replied1244 days and 19 hours ago.

good bye.

Customer replied1244 days and 19 hours ago.

IF I KNEW HOW TO CHECK WHAT YOU HAVE SUGGESTED I WOULD NOT NEED YOUR SERVICE.THANK YOU

Expert: Appliance Man replied1244 days and 19 hours ago.

Most the time it is a bad water valve. Check the drain hose and the fill hoses.

13 Appliance Technicians are Online Right Now

Appliance Questions	Date Submitted
I have a Maytag refrigerator, bottom freezer model number MBF2258WES2	5/16/2013
On a KSCS251, what tool is required to tighten the door ha	5/16/2013
Hi- I own a whirlpool top-loading washer, model # XXXXX	5/14/2013
Appliance Doc, there is a Tappan electric range that the surface	5/14/2013
I have a Frigidaire "Affinity" front load washing machine.	5/14/2013
Maytag MFD2560HEW- refridgerator not cooling, freezer fine.	5/14/2013
whirlpool built in oven went dead during self cleaning, replaced	5/14/2013
I have a Bosch HBL7 Double Built In Oven with convection baking.	5/14/2013
I have a Maytag Gemini oven Model#MGR6875ADS. The oven beeps	5/14/2013
Hi: I have a Maytag stacked washer dryer. The dryer is working	5/13/2013