How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Kenmore Elite Speedcook Oven overhead light & exhaust fan

Resolved Question:

My Kenmore Elite Speedcook Oven overhead light & exhaust fan does not work. I replaced the bulb. It seems like maybe a blown fuse? Model # XXXXX
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
is the rest of the microwave working? clock,and light inside?
Customer: replied 6 years ago.
yes, everything else seems to be working fine.
Expert:  Bryan replied 6 years ago.
the most likely cause for this would be the control board assembly.there is no fuse for just the lights and fan, did these go out at the same time?
Customer: replied 6 years ago.
yes they both went out at same time. What is the cost to replace this? Can I replace this myself?
Expert:  Bryan replied 6 years ago.
this is the smart board on yours, Part(NNN) NNN-NNNN width=it runs about $115.00 @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-363-63694302-%3d%3dei1086334&PartID=1086334 you could probably do this yourself, its located in the control panel ,hope this info is helpful, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions