How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kenmore front load washer. It starts the wash cycle

Resolved Question:

I have a Kenmore front load washer. It starts the wash cycle then I get
P-21 and it is full of water.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
you will need to remove the water and then take the panel off the bottom front under the door and clean the drain trap on the pump. you will see the cap on the front of the pump turn this counter clock wise and pull the trap out,clean and put back in, also be careful there will be lots of extra water in the hoses , get lots of towels ready, thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you