How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Kitchenaid combo wall oven, m/n KEMS378YALO. The

Resolved Question:

I have a Kitchenaid combo wall oven, m/n KEMS378YALO. The upper unit is a microwave/convection oven. The microwave works fine but the convection unit displays a "FAULT4" when activated. I need to know what this fault is indicating & a suggested solution (If I cycle power to the oven it will run for several minutes before the fault appears)
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
the F-4 code refers to a bad temperature sensor,
F4Shorted oven temperature sensor Replace oven temperature sensor
you need to replace this, Part 722235you can order this @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-KEMS378YALO-%3d%3dei722235&PartID=722235 thanks, Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions