How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Bosch Washer Model #WFMC6400UC-01 does not fill enough for

Resolved Question:

Bosch Washer Model #WFMC6400UC-01 does not fill enough for rinse cycle, only a trickle, stops with error message:"check taps". It fills normally for wash cycle, so filters, valves and taps must be ok. Electronic problem? Please help.
Jim Vogel.
Submitted: 6 years ago.
Category: Appliance
Expert:  Bryan replied 6 years ago.
this unit has a dual cold water fill valve in it, there are only two possibilitys for your problem, 1 the screen in the valve are clogged or 2 the valve is bad, Part(NNN) NNN-NNNN width=take you cold water hose off and check the screen make sure thier niot clogged, if that dioesnt work replace the valve, heres a link to the valve, http://www.repairclinic.com/SSPartDetail.aspx?s=t-WFMC6400UC-01-%3d%3di1105556&PartID=1105556 its only around $30.00. hope this info helps, thanks Bryan
Bryan and other Appliance Specialists are ready to help you