How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73367
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I have a viking professional dishwasher which is flashing a

Resolved Question:

I have a viking professional dishwasher which is flashing a "Light China" error code. I went on viking's website and it says it is a state (iu) error & to try resetting. I have tried resetting (holding down start/stop butting), turning power off, and unplugging dishwasher to reset and nothing is helping. This happened a couple weeks ago and I was able to reset and it worked. It's only 3 years old. The dishwasher sounds like it's going to start, then quits after maybe 30 seconds.

Thanks for your help!

Sonja Barker
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
UI error means your control board is detecting an internal short in the control board. If it doesn't reset by resetting the power, you will need to replace the control board unfortunately.
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions