How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MASTER-TECH Your Own Question
MASTER-TECH, Home Appliance Technician
Category: Appliance
Satisfied Customers: 345
Experience:  30 years in the trade, lead tech in large company, always training on the newest technology
Type Your Appliance Question Here...
MASTER-TECH is online now
A new question is answered every 9 seconds

washer filled, not agitating or spinning out water

This answer was rated:

washer filled, not agitating or spinning out water
If you lift and close the lid near where it closes do you hear a click?
Customer: replied 6 years ago.

Can you get me the series # XXXXX the model tag please?

Customer: replied 6 years ago.
Unplug the unit and find the 4-screws on top just behind the control panel. Remove the two inner screws. Tilt out the control out by the top of it. Find the door switch in the center of the opening. Do you see a fuse on the switch assembly, is it bad?
Customer: replied 6 years ago.
this will take me some time to do,as tub is filled and will have to move the washer out to manuver around. can I get back to you on this, and without making another deposit?
If you can unplug it you do not have to move the unit. We have this question open and you can pick it up with in the next 24 hours.
Customer: replied 6 years ago.
ok will do
talk with you soon
Customer: replied 6 years ago.
have solved problem with washer, unplugging washer worked,how simple! Thanks
No problem. If the outlet is loose replace it. It can cause the motor to run hot or burn the plug. Thank you have a good night.
MASTER-TECH and other Appliance Specialists are ready to help you

Related Appliance Questions