How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

How do I eplace the small front burner on GE STOVE JGPB33GEL2WP

Customer Question

How do I eplace the small front burner on GE STOVE JGPB33GEL2WP ?
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
can you check the model #? its not comming up, thanks Bryan
Customer: replied 7 years ago.
JGBP33GEL2WP
Expert:  Bryan replied 7 years ago.
I cant get this model # XXXXX come up, is this an American G.E. range?
Customer: replied 7 years ago.

MODEL JGBP33GEL2WP

Expert:  Bryan replied 7 years ago.
ok that works, when you say burner what do you mean? this, Part 245735
Customer: replied 7 years ago.
yes
Expert:  Bryan replied 7 years ago.
ok you will need to shut the gas off before any repair begins. I'll send you some diagrams, this is not a small job you need to remove all the screws on all the burners to lift the top, once thats done there will be two clips holding the top down along the front between the top and the front of the range push these in and lift the top then you can get at the burner tubes to take the burner out. if you dont feel comfortable doing this call a tech to replace this, thanks Bryan
Bryan and other Appliance Specialists are ready to help you
Customer: replied 7 years ago.

The replacement burner has a threaded female connection. Is that correct?

Expert:  Bryan replied 7 years ago.
yes, the tube screws into it. be carefull not to crossthread this. why do you need to replace the burner?
Customer: replied 7 years ago.
The ignighter broke
Expert:  Bryan replied 7 years ago.
you should be able to replace just the igniter electrode,
Spark electrode, burner
Part 244971
but you might as well replace the whole thing because the electrode is $53.00 anyway, thanks Bryan

Related Appliance Questions