How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

My Maytag MDB-9 dishwasher will not run. When I lock it and

Resolved Question:

My Maytag MDB-9 dishwasher will not run. When I lock it and press the auto clean button, like flickers, but nothing happens...any ideas?
Submitted: 7 years ago.
Category: Appliance
Expert:  Appliance Medic replied 7 years ago.
Hello pretty common issue. Turn the power off to the unit for a min if that does not reset it the touch pad will need to be replaced.
Customer: replied 7 years ago.
Does that mean unlpugging it? If so, not sure where that will be, as I didnt install it.
Expert:  Appliance Medic replied 7 years ago.
Yes either turn the breaker off to it or unplug it. The plug if there is one will be under the sink were the disposal plugs into.
Customer: replied 7 years ago.
Sounds good....Unfortunately the person I bought this home from did not labe circuit breakers, i suppose i will have to guess...thanks for you help
Expert:  Appliance Medic replied 7 years ago.
Yes your welcome. It will be on a 20amp breaker.
Appliance Medic and other Appliance Specialists are ready to help you