how do i stop the dishwasher from beeping when the load is thru - it drives me crazy and wakes up my kids.thank you!
do you have a brand and a model number to see if this is an option on your unit?
it is a Bosch Dishwasher, model # XXXXX
The Cycle Completion SignalThis Cycle Completion Signal is a tone that sounds to alert you when your dishwasher finishes washing and drying your dishes. You can either disable the tone or set the volume.To activate: · Press and hold the right “Cancel Drain” button then press and hold the On/Off button. · When the light on the “Cancel Drain” button you are pressing illuminates and the tone begins to sound, release both buttons. · Press the right-most “Cancel Drain” button until the tone is either at the desired volume or is silent. · Press the On/Off Button. The Cycle Completion Signal is now set.
we tried what you just said and we never heard the tone - are we doing something wrong?
make sure the unit is off first. Then press the right cancel button and hold it (while the unit is off).Then press the power on button and hold it while still holding the right cancel button. The right cancel button should illumate and you should hear a sound (some models) Press the right cancel button and you will either hear a different tone or you will see the light go on and off. If it's off then the buzzer is off.
7+ years being an appliance technician with factory training