How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask applianceguy Your Own Question
applianceguy
applianceguy, Customer Service
Category: Appliance
Satisfied Customers: 1902
Experience:  Ten Years experience. Certified in most major brands Including Whirlpool Frigidaire maytag Amana.
9557001
Type Your Appliance Question Here...
applianceguy is online now
A new question is answered every 9 seconds

GE electric flat top stove Cooktop hot light stays on with

Resolved Question:

GE electric flat top stove Cooktop hot light stays on with all burners off and top cool
Submitted: 7 years ago.
Category: Appliance
Expert:  applianceguy replied 7 years ago.
Hi, the sensors are on top of the burners. They are part of the burner, to replace the sensor you have to replace the burner. If you only have one hot indicator light you will have to find out what burner sensor is bad. If you have the indicator that tells you what burner is hot then you know what burner sensor is bad.
applianceguy and 2 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
how do I test the burner?
Expert:  applianceguy replied 7 years ago.
You can ohm out the sensors on the burners they should read open. Or unplug the range and unplug sensors one at a time. Tape up wires and plug unit back in and see when light goes out.