How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Is there any point in thinking about mending a 6 year old Admiral

This answer was rated:

Is there any point in thinking about mending a 6 year old Admiral tumble dryer - the cylinder is banging about and is obviously loose and banging about on each turn.
if you can get the model 3 I can help, try looking in these places.
LOCATE YOUR DRYER MODEL NUMBER
First, here are some tips to help with your model number:
  1. Don't enter a dash if it's not required.
  2. Don't enter any blank spaces.
  3. Be sure a zero is not the letter O.
  4. Be sure a lower case L is not a 1.
  5. Kenmore models always have a 3 digit prefix such as 110 or 665, then a period, then more numbers.
Next, look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or stamped onto the tag and it may be written in two different type sizes or styles.

You might find the tag in one of these places:

Dryer only, gas or electric

  • Inside the door, on the cabinet frame
  • On the back of the unit, near the top
  • On the side of the unit, near the front

Washer-dryer combination unit

  • Inside the dryer door, on the door frame
  • On top of the dryer
  • On the side of the washer, near the bottom, front
  • Under the washer lid
thanks Bryan
Customer: replied 7 years ago.
Hi
Model number is XXXXX

your problem is the drum roller supports. Part 3044these go all the time. we replace allot of these, heres the diagram of their location, thanks bryan
Bryan and 4 other Appliance Specialists are ready to help you