How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

after clean cycle is done the water just sits it will not go

Resolved Question:

after clean cycle is done the water just sits it will not go drain and go into rinse cycle. Whirpool model LSR6332KQ1
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
this happens when it gets to the drain, spin cycle, correct? this is an indication the lid switch is bad. Part 547225the lid switch is located where the post on the lid goes through the top of washer. make sure this isnt broken and falling down so the post doesnt hit it. let me know thanks Bryan
Customer: replied 7 years ago.
OK I WILL CHECK IT AS SOON AS I GET HOME. IF I HIT ACCEPT AND THAT NOTS WHAT WRONG CAN I STILL ASK ANOTHER QUESTION?
Expert:  Bryan replied 7 years ago.
yes you can, I can send you video on how to get at the switch also. let me know, if its later this afternoon I will be out until around, 4-5 pm I will respond after that , thanks Bryan
Bryan and 4 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.

OK PLEASE SEND VIDEO AND A PLACE WHERE I CAN BUY SWITCH. IM IN CHARLOTTE NC

Expert:  Bryan replied 7 years ago.
this is one video, this machine may not be exactly like yours but basicly the same setup. just the screws(location) on yours may be different to get the control panel up. http://www.youtube.com/watch?v=WLPGs2UMUJc&feature=related and this one shows the different locations of the control panel screws, http://www.youtube.com/watch?v=FNRd04vwc4Y&feature=PlayList&p=F7887BFEC1C720B3&playnext=1&index=13 you can get the switch @ http://www.repairclinic.com/SSPartDetail.aspx?s=t-LSR6332KQ1-%3d%3di547225&PartID=547225 for around $30.00, thanks Bryan