How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Neilwill Your Own Question
Neilwill
Neilwill, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1274
Experience:  10 years experience appliance repair and installation
25067054
Type Your Appliance Question Here...
Neilwill is online now
A new question is answered every 9 seconds

I need help with a Kenmore sewing maching.

Customer Question

I need help with a Kenmore sewing maching.
Submitted: 7 years ago.
Category: Appliance
Expert:  Neilwill replied 7 years ago.
Hi yaCustomer

To change the belt, you must do these steps to access to the drive- belt shaft:

1- unplug AC power cord from the wall

2- remove the hand wheel

3- remove thread tension knob

4- slide top cover outward and remove the top cover

5- remove old belt from motor's shaft

6- install new belt onto motor shaft and onto drive-belt shaft (same shaft with the hand wheel)

7- install everything back in reversed manner


Click below for your manual
Your sewing machine manual