How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Your Own Question
Dave, Home Appliance Technician
Category: Appliance
Satisfied Customers: 297
Experience:  34 years experience as a repair technician
Type Your Appliance Question Here...
Dave is online now
A new question is answered every 9 seconds

whirlpool dishwasher model du1145xtpba - very little water

This answer was rated:

whirlpool dishwasher model du1145xtpba - very little water coming from spray arms - low presure
How deep is the water in the bottom of the DW tub?
Customer: replied 7 years ago.
water fills above heating element - appears to be proper level
Customer: replied 7 years ago.
any other suggestions??
This model has a chopper blade, that if it breaks, the screen clogs and the pump moves very little water. It is part #6 on this link, and located under the sprayarm, filter and chopper cover. AND MOTOR PARTS&documentId=W0702221&blt=06
Customer: replied 7 years ago.
is this part accessable in front of the pump or under the accumulator in the tub
Under the sprayarm. You need to remove the sprayarm , then the manifold for upper spray, then there are 4 T20 torx screws, then there are 1 or 2 T15 torx screws on the cover for the chopper blade.
Dave and 2 other Appliance Specialists are ready to help you

Related Appliance Questions