How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask built1950 Your Own Question
built1950
built1950, Handyman
Category: Appliance
Satisfied Customers: 210
Experience:  Appliance Installer
19717507
Type Your Appliance Question Here...
built1950 is online now
A new question is answered every 9 seconds

Fisher and Paykel soft touch 918TD was checked out as ok Moved

Customer Question

Fisher and Paykel soft touch 918TD was checked out as ok
Moved it to alternate property but no power on lights just beeps on pressing a button.
No hot water connected.
Does this mean a new board?
Regards
MM
Submitted: 7 years ago.
Category: Appliance
Expert:  built1950 replied 7 years ago.
Hi Ya mrmore51,

You may need to hook up the hot water to have a true test. Some units will not operate without this. Otherwise it sounds like you may have a stuck keypad. These are the first steps before a
new board.
built1950 and 2 other Appliance Specialists are ready to help you
Customer: replied 7 years ago.
Hi Ya built 1950

Sounds like I am 1 year older than you.

Hooked up water still no display, simply beeps when a button is pushed.

What is a stuck keypad
RegardsCustomer
Customer: replied 7 years ago.
Hi Ya built 1950

Sounds like I am 1 year older than you.

Hooked up water still no display, simply beeps when a button is pushed.

What is a stuck keypad
Regards