How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

We have an almost 10 year old Kenmore dishwasher that is not

Resolved Question:

We have an almost 10 year old Kenmore dishwasher that is not draining - the water is sitting in the bottom of the basin even after the cycle has supposedly run all the way through - do you know what would cause this?
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
I see this allot on these. usauly it this. Part 2844this is sticking out of the pump assembly and its the drain check valve. your drain hose that runs to your sink is connected to this , these get clogged, you will need to get the water out of the machine and take the front bottom kick plate off and you should see this on the right front comming off the pump and your drain hose is connected to this . remove the drain hose and this unscrews counter clockwise, check the for clogs and rinse it off in the sink , there is a very small hole the water goes through in drain. hope this helps, thanks Bryan
Bryan and 4 other Appliance Specialists are ready to help you

Related Appliance Questions