How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a whirlpool front load washer model# GHW9150PW1 serial

Resolved Question:

I have a whirlpool front load washer model# XXXXX serial CSS4312431 and I am getting an F 07 code. What does this mean.
Submitted: 7 years ago.
Category: Appliance
Expert:  Bryan replied 7 years ago.
this is the code. the motor control board has an issue, thanks Bryan

Motor Control Unit Error

The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.

  • Check wire harness connections between the Drive Motor and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the MCU
  • Check the Drive Motor
  • Check the Wire Harness
Customer: replied 7 years ago.
So this needs a technician to fix? Correct??
Expert:  Bryan replied 7 years ago.
when it comes to these machines its better to pay a tech to diagnose this than make a mistake on an expensive part. yes I would call a tech for this. thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions